Technical Specifications

Size

108.2 mm x 61.5 mm x 43.2 mm (4.29 in x 2.44 in x1.7 in) with Alligator Clip 108.2 mm x 61.5 mm x 37.8 mm (4.29 in x 2.44 in x 1.49 in) with Klick Fast Stud

Weight

185 g (6.5 oz) with Alligator Clip, 169 g (6 oz) with Klick Fast Stud

Working Temperature

-40°C to 60°C (-40°F to 140°F)

Working Humidity

5% to 95%

Ingress Protection

IP66, IP68

Alarms and Type

Visual, vibrating, audible (95 dB); Low, High, TWA, STEL, Negative Drift, Over Limit, Multi-alarm

Self-Test

Perform diagnostic of sensor, circuitry on activation;
Activated detector automatically performs analog sensor diagnostic every 10 minutes, digital sensor diagnostic every second

Typical Battery Life

Two months (with NDIR CH4 sensor)

Connected Worker

Bluetooth® Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App, Device Configurator App and Safety Suite Device Configurator Software

User options

• Change High, Low, TWA and STEL alarm set points • Latching alarms
• Set Calibration and/or bump test reminders
• Assign worker and location assignments

• Always on
User options only available via Device Configurator and Safety Suite Device Configurator

Certifications and Approvals

ATEX, IEC Ex, contains FCCID, contains IC

Device Warranty

Two-year warranty for sensors and detector

Sensor Specifications

Gas Name

Measuring Range

Resolution

Working Temperature

CO

0 to 2000 ppm

1 ppm

-40°C to 60°C (-40°F to 140°F)

H2S

0 to 200 ppm

1 ppm (can set to 0.1 ppm)

-40°C to 60°C (-40°F to 140°F)

SO2

0 to 150 ppm

0.1 ppm

-20°C to 50°C (-4°F to 122°F) intermittent -40°C to 55°C (-40°F to 131°F)

O2

0 to 30% VOL

0.1% VOL

-40°C to 60°C (-40°F to 140°F)

NDIR-CH4

0 to 100% LEL

1% LEL

-40°C to 60°C (-40°F to 140°F)